The Best 50 Inch Cree Light Bars

Rididhorse 50 Inch has an average rating of 4.7 out of 5 based on 15 user reviews.

1. Rigidhorse

Rididhorse 50inch

If you’re looking for a high quality light bar, you can’t go wrong with the Rigidhorse. This versatile curved bar works well on 4x4s, jeeps, trucks, ATVs, SUVs, and boats. A lightbar is only as effective as the lights it contains. Rigidhorse sets the bar high with authentic Cree LEDs. Cree is the world’s most well-known LED manufacturer, and the bulbs allow the light bar to produce a large amount of light with only a small amount of energy. The lights illuminate your path even at long distances while conserving energy. You never know where your adventures will take you, and the Rigidhorse 50″ light bar can stand up to even the toughest drives. The lights are well-protected thanks to the bar’s durable aluminum construction and virtually unbreakable polycarbonate housing. Since the product is both shock resistant and waterproof, you’ll be able to enjoy its bright light for years. When you purchase the Rigidhorse 50″ light bar, you’ll also receive the mounting brackets and wiring harness, so the product arrives ready for installation. Install the light bar on your vehicle, and get ready to enjoy its 480 watts of light.

 1. Rigidhorse2. Yamaige3. Auxbeam4. Autofeel
Dimensions50 x 8 x 5 inches52 x 3.4 x 4.8 inches53 x 4.8 x 3.4 inches52 x 8 x 5 inches
LEDs96 * 5W 96 * 3W96 * 3W96 * 3W
BeamSpot 30°
Flood 60°
Spot 30°
Flood 60°
Spot 30°
Flood 60°
Spot 30°
Flood 60°
IP RatingIP67IP67IP67IP68
Warranty1 year2 year1 year1 year

2. Yamaige

Yamaige 52inch

The 5D version of the Yamiage 50″ light bar was designed with a lighting efficiency of 85 percent. To improve the maximum range of the beam, the light bar was designed using a fish eye cap reflector. The strength of the light was optimized further with the implementation of Cree LED lamp beads. The light bar’s LED bulbs have the total wattage of 288W, and the exterior has been made with a metallic finish. The Yamiage’s operating voltage is 10-30DV, and the color temperature is 6500K. The entire unit is encased within a sturdy aluminum housing to give it more durability and longevity. In addition to the light bar itself, each package comes with mount brackets and wiring harness as well. Yamiage light bar is impressively bright and sturdy. The light bar is not only powerful in terms of the strength of its light, but also has great water resistance thanks to its secure casing.

3. Auxbeam

Auxbeam 50inch

This 288W LED light bar is not designed for daily driving needs, but instead to bring more lighting to a worksite, the woods or anywhere else added lighting is required. The CREE lighting design uses a dual row of 3W chips in order to boost brightness over a standard design. The Auxbeam light bar offers both a hyper spot and flood pattern. It can be used in a host of different vehicles. While a truck or SUV can take advantage of this lighting, emergency and rescue vehicles are some of the most commonly used lighting setups. The light bar does come with the necessary mounting kits, so no added wiring is needed upon purchasing the hardware. It is recommended to have a trained and certified professional install the lighting. Unless the buyer has extensive experience installing lighting and wiring new harnesses into a vehicle, it is best to have a professional perform this kind of installation. No matter the vehicle, this is an excellent piece of lighting equipment.

4. Autofeel

Autofeel 52inch

The Autofeel 50″ light bar is a curved LED lighting configuration for a host of vehicles. The curved lighting design provides two major advantages. First, the bracket to bracket installation points measure less than 50 inches, so it can fit on the hood of a vehicle that is slightly smaller than 50 inches. The next major advantage is for flood lighting. As the light bar is curved, it naturally increases the amount of light coverage it provides thanks to the natural arch in the light bar. The light Bar uses 5D lens technology. This boosts the brightness of the light bar without increasing the amount of energy it uses over previous 4D lens technology. It does come with the necessary brackets and wiring harness. The Autofeel light bar takes advantage of military grade water proofing. The light bar itself is a 288 watt, 30 volt setup, so it does have exceptional power when needed.